The various activex error codes, and the meaning of the various codes is defined as under.
Errors 23040-23150 (SMS and Pager Toolkit - GSM Specific error codes)
Error Description
23130 Device is not a GSM device
23132 Prefered message storage not supported by this device
23133 SIM card requires PIN code
23134 PIN code entered is invalid
23135 No SIM card inserted
23136 This modem is either not a GSM modem, or SIM card is not inserted
23140 All messages have been read
23142 Invalid message ID
23150 No network coverage, or network busy
Errors 23151-23200 (SMS and Pager Toolkit - WAP specific error codes)
Error Description
23151 WAP URL too long (255 bytes maximum)
23152 WAP Title too long (50 bytes maximum)
23155 Wap parameter invalid or text too long
23160 Delivery reports not supported by this device
23170 Function only supported when using PDU mode
Errors 23200-23299 (SMS and Pager Toolkit - SMPP specific error codes)
Error Description
23201 Unable to connect to host
23202 Unable to bind, check credentials
23203 Not bound, connect first
23205 Operation timed out
23210 Invalid password
23211 Invalid system ID
23215 Canceling message failed
23220 Message rejected by provider
23225 Unable to query message or invalid message reference
23230 Not enough credits to send this message
23231 Recipient address blocked or not supported
23270 Specified configuration file cannot be loaded
23271 File is not a SMPP configuration file
23272 Failed to save configuration file, most probably, you specified an invalid filename, or you do not have access to this location
Errors 23400-23499 (SMS and Pager Toolkit - UCP / TAP)
Error Description
23460 Invalid UCP provider
23461 No response from UCP provider
23462 Provider reported a syntax error
23463 Provider rejected the message ( NACK )
23470 Error during initial negotiation phase
23471 Invalid pager number or number format
23472 Sending messages to this pager are bared by the provider
23473 Invalid Message
23474 Message was sent, but no ACK received
Errors 23500-23599 (SMS and Pager Toolkit - SNPP specific error codes)
Error Description
23500 No SNPP provider specified
23501 Cannot connect to SNPP provider
23510 Invalid SNPP password
23520 Invalid pager ID or pincode
23550 Command not supported, see logile for details
23552 No response from SNPP provider or command timeout
Errors 23600-23699 (SMS and Pager Toolkit - Ringtone / Picture specific error codes)
Error Description
23601 Failed to open bitmap file (file does not exist)
23602 Failed to open bitmap file (invalid format)
23604 Cannot encode picture message, load bitmap first
23605 Invalid countrycode specified for operatorlogo
23606 Invalid networkcode specified for operatorlogo
Errors 23700-23899 (MMS Toolkit)
Error Description
23710 GPRS modem initialization command(s) failed
23730 No recipient address(es) specified
23731 Invalid recipient address used in either To, CC or BCC field
23732 Invalid MMS message class specified
23733 Failed to load attachment file
23734 Invalid MMS priority value specified
23735 No MMSC Server address specified
23736 No WAP gateway address specified
23737 GPRS access point name not specified
23740 Failed to create Dial Up Networking entry
23741 Generic Dial-up Networking error
23742 GPRS connection lost, reconnect first
23745 No response from WAP gateway
23746 Unexpected response from WAP gateway
23748 Invalid MRU (Maximum Receive Unit) size
23749 MMS Message size too big
23750 You need to pass a MMSMessage object as parameter to the Send command
23752 Failed to initialize Windows Sockets
23753 Memory allocation failed
23755 MMS message is empy (no content specified)
23756 No more recipients
23757 No more message slides
23758 No more content in slide
23761 MMSC response: unspecified error
23762 MMSC response: service denied
23763 MMSC response: corrupt message format
23764 MMSC response: sending address unresolved
23765 MMSC response: message not found
23766 MMSC response: network problem
23767 MMSC response: content not accepted
23768 MMSC response: unsupported message
23770 Specified configuration file cannot be loaded
23771 File is not a MMS configuration file
23772 Failed to save configuration file, most probably, you specified an invalid filename, or you do not have access to this location
23773 Precompiled MMS file not found
23774 Precompiled MMS file corrupt or failed to load
23775 Failed to save precompiled MMS file
23780 Protocol error, illegal PDU received
23781 Session has been diconnected
23782 Session has been suspended
23783 Session has been resumed
23784 The peer is congested and cannot process the SDU
23785 The session connect failed
23786 The maximum receive unit size was exceeded
23787 The maximum outstanding requests was exceeded
23788 Peer request
23789 Network error occured
23790 User request
23800 MM7 Error: Client Error
23801 MM7 Error: Operation Restricted
23802 MM7 Error: Address Error
23803 MM7 Error: Address not found
23804 MM7 Error: Multimedia content refused
23805 MM7 Error: Message ID not found
23806 MM7 Error: Linked ID not found
23807 MM7 Error: Message format corrupt
23808 MM7 Error: Application ID not found
23809 MM7 Error: Reply application ID not found
23820 MM7 Error: Server error
23821 MM7 Error: Not possible
23822 MM7 Error: Message rejected
23823 MM7 Error: Multiple addresses not supported
23824 MM7 Error: Application addressing not supported
23830 MM7 Error: General service error
23831 MM7 Error: Improper identification
23832 MM7 Error: Unsupported version
23833 MM7 Error: Unsupported operation
23834 MM7 Error: Validation error
23835 MM7 Error: Service error
23836 MM7 Error: Service unavailable
23837 MM7 Error: Service denied
23838 MM7 Error: Application denied
Errors 25000-25299 (Network Monitor - AxNmCfg API interface)
Error Description
25000 Creation of MDAC/ADO object failed
25001 Configuration Database error: invalid OLE object
25003 Configuration Database Location not set
25004 Unable to open Configuration Database
25005 Operation failed because Configuration Database is not opened
25006 Unable to open Configuration Database (database is already opened)
25010 Configuration Database error: field missing in [Rules] table
25020 Configuration Database error: unable to query [Nodes] table
25021 Configuration Database error: record not found in [Nodes] table
25022 Configuration Database error: unable to update [Nodes] table
25023 Configuration Database error: unable to find last record in [Nodes] table
25024 Configuration Database error: unable to insert new record in [Nodes] table
25025 Configuration Database error: unable to delete record(s) from [Nodes] table
25026 Configuration Database error: not allowed to create duplicate values for the ID field
25035 Configuration Database error: unable to query [ServerCredentials] table
25036 Configuration Database error: record not found in [ServerCredentials] table
25037 Configuration Database error: unable to update [ServerCredentials] table
25050 Invalid Tree Item
25051 Tree configration not loaded
25052 Tree item not found
25060 Configuration Database error: unable to query [Tree] table
25061 Configuration Database error: no records in the [Tree] table
25062 Configuration Database error: unable to update [Tree] table
25100 Configuration Database error: unable to query [SmtpSettings] table
25101 Configuration Database error: no records in the [SmtpSettings] table
25102 Configuration Database error: unable to update [SmtpSettings] table
25105 Configuration Database error: unable to query [NetPopupSettings] table
25106 Configuration Database error: no records in the [NetPopupSettings] table
25107 Configuration Database error: unable to update [NetPopupSettings] table
25110 Configuration Database error: unable to query [MetaSettings] table
25111 Configuration Database error: no records in the [MetaSettings] table
25112 Configuration Database error: unable to update [MetaSettings] table
25120 Configuration Database error: unable to find last record in [DistributionGroups] table
25121 Configuration Database error: unable to insert new record in [DistributionGroups] table
25122 Configuration Database error: unable to query [DistributionGroups] table
25123 Configuration Database error: no records in the [DistributionGroups] table
25124 Configuration Database error: unable to update [DistributionGroups] table
25125 Configuration Database error: unable to delete record(s) from [DistributionGroups] table
25140 Configuration Database error: unable to query [MessageTemplates] table
25141 Configuration Database error: no records in the [MessageTemplates] table
25142 Configuration Database error: unable to update [MessageTemplates] table
25150 Configuration Database error: unable to query [LogSettings] table
25151 Configuration Database error: no records in the [LogSettings] table
25152 Configuration Database error: unable to update [LogSettings] table
25155 Configuration Database error: unable to query [ReportSettings] table
25156 Configuration Database error: no records in the [ReportSettings] table
25157 Configuration Database error: unable to update [ReportSettings] table
25160 Configuration Database error: unable to query [MaintenanceSettings] table
25161 Configuration Database error: no records in the [MaintenanceSettings] table
25162 Configuration Database error: unable to update [MaintenanceSettings] table
25165 Configuration Database error: unable to query [XmlViews] table
25166 Configuration Database error: no records in the [XmlViews] table
25167 Configuration Database error: unable to update [XmlViews] table
25170 Configuration Database error: unable to query [SnmpTrapsSettings] table
25171 Configuration Database error: no records in the [SnmpTrapsSettings] table
25172 Configuration Database error: unable to update [SnmpTrapsSettings] table
25173 Configuration Database error: unable to query [DateTimeSettings] table
25174 Configuration Database error: no records in the [DateTimeSettings] table
25175 Configuration Database error: unable to update [DateTimeSettings] table
25176 Configuration Database error: unable to query [AutoBackupSettings] table
25177 Configuration Database error: no records in the [AutoBackupSettings] table
25178 Configuration Database error: unable to update [AutoBackupSettings] table
25180 Configuration Database error: unable to query [PagerSettings] table
25181 Configuration Database error: no records in the [PagerSettings] table
25182 Configuration Database error: unable to update [PagerSettings] table
25185 Configuration Database error: unable to query [SmsSettings] table
25186 Configuration Database error: no records in the [SmsSettings] table
25187 Configuration Database error: unable to update [SmsSettings] table
25190 Configuration Database error: unable to query [AdvancedSettings] table
25191 Configuration Database error: no records in the [AdvancedSettings] table
25192 Configuration Database error: unable to update [AdvancedSettings] table
25200 Registry entry 'Engine0Root' is empty. Please make sure this entry points to the Network Monitor root directory
25201 Unable to access the configuration file. The location of the configration file is stored in the 'ConfigDatabase' registry entry. Please check out this entry. Also check that you have read/write access to this file
25203 Failed to convert configuration file
25204 Memory allocation failed
25205 Configuration file is not compatible with ActiveXperts Network Monitor (version information cannot be retrieved from the configuration file)
25206 Configuration file is created by a newer version of ActiveXperts Network Monitor
25207 Configuration file is created by an older version of ActiveXperts Network Monitor
25208 Path to the configuration directory is empty; please check your registry, or re-install the product
25209 ActiveX component [AxsNmCfg.dll] not registered on this computer. Either manually reigster this DLL on this machine, or reinstall the product
25210 System Database File does not exist
Errors 25300-25399 (Network Monitor - RepCfg.dll)
Error Description
25300 No database connection string specified
25301 Unable to connect to the report database
25302 Failed to execute SQL query in the report database
25303 Failed to load 'Checks' table from report database
25304 Failed to load 'CheckTypes' table from report database
25305 Failed to load 'Results' table from report database
25310 Reporting module not initialized
25311 Reporting not enabled
25312 Check does not exist
25318 Memory allocation failed
25320 E-mail not enabled for this report definition
25321 E-mail notificatons are not enabled in Network Monitor. To enable notifications, enable e-mail notifications in the 'Network Monitor Manager' application
25322 Primary SMTP server is disabled
25323 Secundary SMTP server is disabled
25330 Reporttype is not specified, specify either 'detail' or 'availability'
25331 Reportformat is not specified, specify either 'XML', 'HTML' or 'CSV' format
25333 Invalid or no time period specified
25334 No XSL stylesheet specified
25335 Specified XSL stylesheet cannot be found or does not exist
25336 Failed to copy XSL stylesheet to the output directory
25337 Separator for CSV file missing
25338 Failed to create output file
25339 Insufficient data in database to create report
25350 Failed to load the report configuration (.rep) file
25370 Invalid parameters supplied
25371 Invalid date supplied
25372 Unsupported object type
25373 Invalid filter object supplied
25374 Invalid output object supplied
25399 Unexpected error
Errors 25400-25699 (Network Monitor)
Error Description
25500 Unable to retrieve source database name out of the Database Connection String
25501 Unable to Export configuration. Configuration file does not exist
25502 Unable to Export configuration. Copy File failed
25503 Unable to delete previous Shadow Configuration File
25504 Unable to copy System Configuration File to the Shadow Configuration File
25505 Unable to copy Shadow Configuration File to the Current Configuration File
25506 Unable to locate current configuration file
25507 Current configuration file is in use. Please close all applications and retry
25508 Unable to load conversion module
25520 File is not a Network Monitor 5.x file
25521 File is not a Network Monitor 6.x file
25522 File is not a Network Monitor 7.x file
Errors 27000-27299 (SMS Server - CFG)
Error Description
27000 Registry entry 'ServerRoot' missing
27001 Registry entry 'Configuration' missing
27002 ActiveX component [AxSmsCfg.dll] not registered on this computer. Either manually reigster this DLL on this machine, or reinstall the product
27003 ActiveX component [AEmail.dll] not registered on this computer. Either manually reigster this DLL on this machine, or reinstall the product
27004 ActiveX component [AComPort.dll] not registered on this computer. Either manually reigster this DLL on this machine, or reinstall the product
27005 ActiveX component [ASocket.dll] not registered on this computer. Either manually reigster this DLL on this machine, or reinstall the product
27006 ActiveX component [AxPop3.dll] not registered on this computer. Either manually reigster this DLL on this machine, or reinstall the product
27007 ActiveX component [ASmsCtrl.dll] not registered on this computer. Either manually reigster this DLL on this machine, or reinstall the product
27008 ActiveX component [AxEdit.dll] not registered on this computer. Either manually reigster this DLL on this machine, or reinstall the product
27009 Registry entry 'Server' missing
27010 Internal error: unable to create new ActiveX object
27011 Internal error: unable to create new ADODB object
27012 Registry entry 'ClientRoot' missing
27013 One or more HTML files needed by the program are missing
27020 Unable to open the Configuration Database
27021 Unable to query the Configuration Database
27022 No more records
27023 Unable to create new configuration record; maximum allowed number is reached
27024 Unable to create new configuration record
27025 Unable to modify configuration record
27026 Unable to delete configuration record
27050 Empty Message Database Connection String
27051 Unable to open Message Database
27052 Syntax error in database query
27053 Syntax error in querying all database fields
27054 No more messages in message Database
27060 Unable to create new message
27061 Unable to update message
27062 Unable to execute query in Message Database
27063 Syntax error in the WAP Message Body
27100 Empty Archive Database Connection String
27101 Unable to open Archive Database
27102 Unable to query Archive Database
27103 No more messages in Archive Database
27104 Unable to create new message in Archive Database
27105 Unable to update message in Archive Database
27106 Unable to execute query in Archive Database
27107 Unable to delete message from Archive Database
27200 Invalid schedule time
Errors 23040-23150 (SMS and Pager Toolkit - GSM Specific error codes)
Error Description
23130 Device is not a GSM device
23132 Prefered message storage not supported by this device
23133 SIM card requires PIN code
23134 PIN code entered is invalid
23135 No SIM card inserted
23136 This modem is either not a GSM modem, or SIM card is not inserted
23140 All messages have been read
23142 Invalid message ID
23150 No network coverage, or network busy
Errors 23151-23200 (SMS and Pager Toolkit - WAP specific error codes)
Error Description
23151 WAP URL too long (255 bytes maximum)
23152 WAP Title too long (50 bytes maximum)
23155 Wap parameter invalid or text too long
23160 Delivery reports not supported by this device
23170 Function only supported when using PDU mode
Errors 23200-23299 (SMS and Pager Toolkit - SMPP specific error codes)
Error Description
23201 Unable to connect to host
23202 Unable to bind, check credentials
23203 Not bound, connect first
23205 Operation timed out
23210 Invalid password
23211 Invalid system ID
23215 Canceling message failed
23220 Message rejected by provider
23225 Unable to query message or invalid message reference
23230 Not enough credits to send this message
23231 Recipient address blocked or not supported
23270 Specified configuration file cannot be loaded
23271 File is not a SMPP configuration file
23272 Failed to save configuration file, most probably, you specified an invalid filename, or you do not have access to this location
Errors 23400-23499 (SMS and Pager Toolkit - UCP / TAP)
Error Description
23460 Invalid UCP provider
23461 No response from UCP provider
23462 Provider reported a syntax error
23463 Provider rejected the message ( NACK )
23470 Error during initial negotiation phase
23471 Invalid pager number or number format
23472 Sending messages to this pager are bared by the provider
23473 Invalid Message
23474 Message was sent, but no ACK received
Errors 23500-23599 (SMS and Pager Toolkit - SNPP specific error codes)
Error Description
23500 No SNPP provider specified
23501 Cannot connect to SNPP provider
23510 Invalid SNPP password
23520 Invalid pager ID or pincode
23550 Command not supported, see logile for details
23552 No response from SNPP provider or command timeout
Errors 23600-23699 (SMS and Pager Toolkit - Ringtone / Picture specific error codes)
Error Description
23601 Failed to open bitmap file (file does not exist)
23602 Failed to open bitmap file (invalid format)
23604 Cannot encode picture message, load bitmap first
23605 Invalid countrycode specified for operatorlogo
23606 Invalid networkcode specified for operatorlogo
Errors 23700-23899 (MMS Toolkit)
Error Description
23710 GPRS modem initialization command(s) failed
23730 No recipient address(es) specified
23731 Invalid recipient address used in either To, CC or BCC field
23732 Invalid MMS message class specified
23733 Failed to load attachment file
23734 Invalid MMS priority value specified
23735 No MMSC Server address specified
23736 No WAP gateway address specified
23737 GPRS access point name not specified
23740 Failed to create Dial Up Networking entry
23741 Generic Dial-up Networking error
23742 GPRS connection lost, reconnect first
23745 No response from WAP gateway
23746 Unexpected response from WAP gateway
23748 Invalid MRU (Maximum Receive Unit) size
23749 MMS Message size too big
23750 You need to pass a MMSMessage object as parameter to the Send command
23752 Failed to initialize Windows Sockets
23753 Memory allocation failed
23755 MMS message is empy (no content specified)
23756 No more recipients
23757 No more message slides
23758 No more content in slide
23761 MMSC response: unspecified error
23762 MMSC response: service denied
23763 MMSC response: corrupt message format
23764 MMSC response: sending address unresolved
23765 MMSC response: message not found
23766 MMSC response: network problem
23767 MMSC response: content not accepted
23768 MMSC response: unsupported message
23770 Specified configuration file cannot be loaded
23771 File is not a MMS configuration file
23772 Failed to save configuration file, most probably, you specified an invalid filename, or you do not have access to this location
23773 Precompiled MMS file not found
23774 Precompiled MMS file corrupt or failed to load
23775 Failed to save precompiled MMS file
23780 Protocol error, illegal PDU received
23781 Session has been diconnected
23782 Session has been suspended
23783 Session has been resumed
23784 The peer is congested and cannot process the SDU
23785 The session connect failed
23786 The maximum receive unit size was exceeded
23787 The maximum outstanding requests was exceeded
23788 Peer request
23789 Network error occured
23790 User request
23800 MM7 Error: Client Error
23801 MM7 Error: Operation Restricted
23802 MM7 Error: Address Error
23803 MM7 Error: Address not found
23804 MM7 Error: Multimedia content refused
23805 MM7 Error: Message ID not found
23806 MM7 Error: Linked ID not found
23807 MM7 Error: Message format corrupt
23808 MM7 Error: Application ID not found
23809 MM7 Error: Reply application ID not found
23820 MM7 Error: Server error
23821 MM7 Error: Not possible
23822 MM7 Error: Message rejected
23823 MM7 Error: Multiple addresses not supported
23824 MM7 Error: Application addressing not supported
23830 MM7 Error: General service error
23831 MM7 Error: Improper identification
23832 MM7 Error: Unsupported version
23833 MM7 Error: Unsupported operation
23834 MM7 Error: Validation error
23835 MM7 Error: Service error
23836 MM7 Error: Service unavailable
23837 MM7 Error: Service denied
23838 MM7 Error: Application denied
Errors 25000-25299 (Network Monitor - AxNmCfg API interface)
Error Description
25000 Creation of MDAC/ADO object failed
25001 Configuration Database error: invalid OLE object
25003 Configuration Database Location not set
25004 Unable to open Configuration Database
25005 Operation failed because Configuration Database is not opened
25006 Unable to open Configuration Database (database is already opened)
25010 Configuration Database error: field missing in [Rules] table
25020 Configuration Database error: unable to query [Nodes] table
25021 Configuration Database error: record not found in [Nodes] table
25022 Configuration Database error: unable to update [Nodes] table
25023 Configuration Database error: unable to find last record in [Nodes] table
25024 Configuration Database error: unable to insert new record in [Nodes] table
25025 Configuration Database error: unable to delete record(s) from [Nodes] table
25026 Configuration Database error: not allowed to create duplicate values for the ID field
25035 Configuration Database error: unable to query [ServerCredentials] table
25036 Configuration Database error: record not found in [ServerCredentials] table
25037 Configuration Database error: unable to update [ServerCredentials] table
25050 Invalid Tree Item
25051 Tree configration not loaded
25052 Tree item not found
25060 Configuration Database error: unable to query [Tree] table
25061 Configuration Database error: no records in the [Tree] table
25062 Configuration Database error: unable to update [Tree] table
25100 Configuration Database error: unable to query [SmtpSettings] table
25101 Configuration Database error: no records in the [SmtpSettings] table
25102 Configuration Database error: unable to update [SmtpSettings] table
25105 Configuration Database error: unable to query [NetPopupSettings] table
25106 Configuration Database error: no records in the [NetPopupSettings] table
25107 Configuration Database error: unable to update [NetPopupSettings] table
25110 Configuration Database error: unable to query [MetaSettings] table
25111 Configuration Database error: no records in the [MetaSettings] table
25112 Configuration Database error: unable to update [MetaSettings] table
25120 Configuration Database error: unable to find last record in [DistributionGroups] table
25121 Configuration Database error: unable to insert new record in [DistributionGroups] table
25122 Configuration Database error: unable to query [DistributionGroups] table
25123 Configuration Database error: no records in the [DistributionGroups] table
25124 Configuration Database error: unable to update [DistributionGroups] table
25125 Configuration Database error: unable to delete record(s) from [DistributionGroups] table
25140 Configuration Database error: unable to query [MessageTemplates] table
25141 Configuration Database error: no records in the [MessageTemplates] table
25142 Configuration Database error: unable to update [MessageTemplates] table
25150 Configuration Database error: unable to query [LogSettings] table
25151 Configuration Database error: no records in the [LogSettings] table
25152 Configuration Database error: unable to update [LogSettings] table
25155 Configuration Database error: unable to query [ReportSettings] table
25156 Configuration Database error: no records in the [ReportSettings] table
25157 Configuration Database error: unable to update [ReportSettings] table
25160 Configuration Database error: unable to query [MaintenanceSettings] table
25161 Configuration Database error: no records in the [MaintenanceSettings] table
25162 Configuration Database error: unable to update [MaintenanceSettings] table
25165 Configuration Database error: unable to query [XmlViews] table
25166 Configuration Database error: no records in the [XmlViews] table
25167 Configuration Database error: unable to update [XmlViews] table
25170 Configuration Database error: unable to query [SnmpTrapsSettings] table
25171 Configuration Database error: no records in the [SnmpTrapsSettings] table
25172 Configuration Database error: unable to update [SnmpTrapsSettings] table
25173 Configuration Database error: unable to query [DateTimeSettings] table
25174 Configuration Database error: no records in the [DateTimeSettings] table
25175 Configuration Database error: unable to update [DateTimeSettings] table
25176 Configuration Database error: unable to query [AutoBackupSettings] table
25177 Configuration Database error: no records in the [AutoBackupSettings] table
25178 Configuration Database error: unable to update [AutoBackupSettings] table
25180 Configuration Database error: unable to query [PagerSettings] table
25181 Configuration Database error: no records in the [PagerSettings] table
25182 Configuration Database error: unable to update [PagerSettings] table
25185 Configuration Database error: unable to query [SmsSettings] table
25186 Configuration Database error: no records in the [SmsSettings] table
25187 Configuration Database error: unable to update [SmsSettings] table
25190 Configuration Database error: unable to query [AdvancedSettings] table
25191 Configuration Database error: no records in the [AdvancedSettings] table
25192 Configuration Database error: unable to update [AdvancedSettings] table
25200 Registry entry 'Engine0Root' is empty. Please make sure this entry points to the Network Monitor root directory
25201 Unable to access the configuration file. The location of the configration file is stored in the 'ConfigDatabase' registry entry. Please check out this entry. Also check that you have read/write access to this file
25203 Failed to convert configuration file
25204 Memory allocation failed
25205 Configuration file is not compatible with ActiveXperts Network Monitor (version information cannot be retrieved from the configuration file)
25206 Configuration file is created by a newer version of ActiveXperts Network Monitor
25207 Configuration file is created by an older version of ActiveXperts Network Monitor
25208 Path to the configuration directory is empty; please check your registry, or re-install the product
25209 ActiveX component [AxsNmCfg.dll] not registered on this computer. Either manually reigster this DLL on this machine, or reinstall the product
25210 System Database File does not exist
Errors 25300-25399 (Network Monitor - RepCfg.dll)
Error Description
25300 No database connection string specified
25301 Unable to connect to the report database
25302 Failed to execute SQL query in the report database
25303 Failed to load 'Checks' table from report database
25304 Failed to load 'CheckTypes' table from report database
25305 Failed to load 'Results' table from report database
25310 Reporting module not initialized
25311 Reporting not enabled
25312 Check does not exist
25318 Memory allocation failed
25320 E-mail not enabled for this report definition
25321 E-mail notificatons are not enabled in Network Monitor. To enable notifications, enable e-mail notifications in the 'Network Monitor Manager' application
25322 Primary SMTP server is disabled
25323 Secundary SMTP server is disabled
25330 Reporttype is not specified, specify either 'detail' or 'availability'
25331 Reportformat is not specified, specify either 'XML', 'HTML' or 'CSV' format
25333 Invalid or no time period specified
25334 No XSL stylesheet specified
25335 Specified XSL stylesheet cannot be found or does not exist
25336 Failed to copy XSL stylesheet to the output directory
25337 Separator for CSV file missing
25338 Failed to create output file
25339 Insufficient data in database to create report
25350 Failed to load the report configuration (.rep) file
25370 Invalid parameters supplied
25371 Invalid date supplied
25372 Unsupported object type
25373 Invalid filter object supplied
25374 Invalid output object supplied
25399 Unexpected error
Errors 25400-25699 (Network Monitor)
Error Description
25500 Unable to retrieve source database name out of the Database Connection String
25501 Unable to Export configuration. Configuration file does not exist
25502 Unable to Export configuration. Copy File failed
25503 Unable to delete previous Shadow Configuration File
25504 Unable to copy System Configuration File to the Shadow Configuration File
25505 Unable to copy Shadow Configuration File to the Current Configuration File
25506 Unable to locate current configuration file
25507 Current configuration file is in use. Please close all applications and retry
25508 Unable to load conversion module
25520 File is not a Network Monitor 5.x file
25521 File is not a Network Monitor 6.x file
25522 File is not a Network Monitor 7.x file
Errors 27000-27299 (SMS Server - CFG)
Error Description
27000 Registry entry 'ServerRoot' missing
27001 Registry entry 'Configuration' missing
27002 ActiveX component [AxSmsCfg.dll] not registered on this computer. Either manually reigster this DLL on this machine, or reinstall the product
27003 ActiveX component [AEmail.dll] not registered on this computer. Either manually reigster this DLL on this machine, or reinstall the product
27004 ActiveX component [AComPort.dll] not registered on this computer. Either manually reigster this DLL on this machine, or reinstall the product
27005 ActiveX component [ASocket.dll] not registered on this computer. Either manually reigster this DLL on this machine, or reinstall the product
27006 ActiveX component [AxPop3.dll] not registered on this computer. Either manually reigster this DLL on this machine, or reinstall the product
27007 ActiveX component [ASmsCtrl.dll] not registered on this computer. Either manually reigster this DLL on this machine, or reinstall the product
27008 ActiveX component [AxEdit.dll] not registered on this computer. Either manually reigster this DLL on this machine, or reinstall the product
27009 Registry entry 'Server' missing
27010 Internal error: unable to create new ActiveX object
27011 Internal error: unable to create new ADODB object
27012 Registry entry 'ClientRoot' missing
27013 One or more HTML files needed by the program are missing
27020 Unable to open the Configuration Database
27021 Unable to query the Configuration Database
27022 No more records
27023 Unable to create new configuration record; maximum allowed number is reached
27024 Unable to create new configuration record
27025 Unable to modify configuration record
27026 Unable to delete configuration record
27050 Empty Message Database Connection String
27051 Unable to open Message Database
27052 Syntax error in database query
27053 Syntax error in querying all database fields
27054 No more messages in message Database
27060 Unable to create new message
27061 Unable to update message
27062 Unable to execute query in Message Database
27063 Syntax error in the WAP Message Body
27100 Empty Archive Database Connection String
27101 Unable to open Archive Database
27102 Unable to query Archive Database
27103 No more messages in Archive Database
27104 Unable to create new message in Archive Database
27105 Unable to update message in Archive Database
27106 Unable to execute query in Archive Database
27107 Unable to delete message from Archive Database
27200 Invalid schedule time
Post a Comment